Android x86 jellybean 4.2 and grub sample

Now available Android x86 4.2 jelly bean test for you who like the android x86, android x86 is android version for pc or laptop computer, can be directly installed to the hard disk or installed into the emulator such as Virtual Box or any others. The previoust post I have posted how to install android x86 android version 4.0 RC2 or ICS (ice cream sandwicth) dual boot with Windows XP and can be installed to others windows like windows 7 and windows 8 and ubuntu too.



Here I am just informing about android x86 jelly bean 4.2 that has been released, but it has actually been a long time ago this version released, for installation can be seen in the post how to install android on computer, and change grub. To install grub android can be seen also in the link above, and the grub which should entries to grub.cfg. Android iso that I use is android-x86-4.2-20130228.iso.

For that installs jelly bean android x86 grub manually This is the setting for android x86 4.2 jelly bean grub :

### Android Grub#



menuentry "android-4.2-test" {

set root='(hd0,x)'

linux /android-4.2-test/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 SRC=/android-4.2-test video=-16

initrd /android-4.2-test/initrd.img

}



menuentry "android-4.2-test (Debug mode)" {

set root='(hd0,x)'

linux /android-4.2-test/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 DEBUG=1 SRC=/android-4.2-test video=-16

initrd /android-4.2-test/initrd.img

}



### End #

As usual the red texts must be change with android installation partition on a PC or laptop computer. To determine which partition is installed in the partition will be known at the time of the first time or install android can see more details on how to install android link above see on your computer or pc section before final posting.



The grub setting for android x86 jellybean 4.3 almost same the different only name folder you can see the android x86 4.3 jellybean grub setting manually on that link.

There are some changes to the android x86 4.2 jelly bean test this one is that there is no translator ARM, which means that the android 4.2 x86 is not going to much to run apk in goolge play app store.

Here are some of the issues that occur in android x86 4.2 jelly bean are:

1. Android will sometimes freeze or lag.

2. Android is not equipped with ARM translator. ARM translator as I mentioned above that with this android without ARM translator then some android apk apps will not work properly or even unworkable.

3. Can not suspend or resume application so its better to disable screen lock to not activated.

4. Bluetooth will not work.



How do you think to try after finding out some of the issues that might occur on android x86 4.2.2 version, different with android x86 4.0 RC2 is still equipped ARM translator, so nearly all applications apk in google android play store can be run.



To download please visit the following web code @ google or Android x86 and the latest version of android x86 jellybean 4.3 has been released here the link.

How to install android sdk on windows

Due to a problem when installing or using BlueStacks android with a low computer specs as only 1 GB Ram and VGA are not HD or VGA is still minimum around 256 MB or less it for use during install BlueStacks on Windows will run into various problems such as VGA which should be updated and at the time of install some applications like WeChat that can not be installed in BlueStacks is being installed on a computer with low specs.



If the user experience of these things were supposed to VGA with a capacity of 128mb to 256mb should be updated VGA driver or update it with a VGA which has a capacity of at least a decent enough example of 512mb, but if so we could use alternative android emulator such as using android sdk and can be installed in various windows like windows xp, windows 7 and windows 8, android sdk installed in ubuntu was running well.



Android sdk emulator is that we can use on your computer or laptop so if we do not have a android phone and just want to know how the operating system works, and it allows us to use a variety of applications in the android emulator on PC such as WeChat, WhatsApp, KakaoTalk , line, games and so forth.



I use the android sdk emulator in Windows 8 with a dual core Pentium PC, VGA 256 mb, 1 gb ram initially but android sdk liked it a little tough but after the upgrade it so 2 gb ram android sdk on my computer was so smoothly although there is little sometimes a little slow.

The following steps should be done before installing the android sdk emulator on a PC, laptop or computer.

1. For those that do not have java on his computer first download and install the java here.



2. Download Android SDK emulator here, select the bottom of the SDK is to post only tool and then select the Windows 32 & 64-bit -> installer_r22.0.1-windows.exe.



3. Once Java is installed and the android sdk tools have downloaded android sdk install it and follow the steps it according to the instructions given, but at the moment there are options such as install just for me and install it for anyone that's up to you but I choose the install for anyone look at the picture below.

4.After android sdk tools already installed, its folder in program files/android, android so be easy to find or on the run will then open the Program Files folder -> android -> android-sdk and there will be a file called SDK Manager, right click on the mouse and Send to a desktop, this is to add a shortcut icon to your desktop.



5. Open SDK Manager icon on desktop and later there will be option to choose android which will be installed and will be used as an android, there is android 2.1, 2.3 (ginger breed), 3.0 (Honeycomb), 4.0 (ICS), 4.2 (Jellybean). Want all the install also does not matter as long as a lot of Internet quota :).

6. Once downloaded and installed android, then open the tool and click on the Manage AVDS tab at the top the android sdk to start using android emulator.

7. Then click the New button on the right android avd tool.

8. Fill as needed as described below:

• AVD name = fill free, but don't use space


• Device is to choose the android that we will use later with a screen size of Android


• Target is installed in the android sdk tool.


• CPU / ABI = usually wear arm


• keyboard and tick skin only


• Front camera and back camera may be used to select one of the main course options or choose not to use none.


• Memory Options for the Ram = 1 GB ram computer use Ram = 512 and for use 2GB Ram ram = 1024.


• Internal Storage 200 free = example only.


• SD Card = 1024


• Last click OK.

9. After all filled and click OK then in AVD or Android Virtual Device Manager will be the name of the android system we have created. To do this we can directly click start on the right, to make a new android emulator and click New to Change we can click on the Edit button. To start using the Android SDK on Windows click on the name of android that had been made ​​and start clicking on the right and click on launch window.

10. Then a new window will pop up was the android sdk. To make the android sdk so that its display to portrait or landscape or rotate or rotated into elongated click the button number 7 or 9 on the right keyboard and of the numlock.

Failed to start or load libgl.so in ubuntu android sdk emulator

When I install android sdk emulator on a computer with the operating system ubuntu 12.04 and run and when i run android sdk emulator i have error message are failed to open or load libgl.so and shared , first I had thought that this was one of the low of the specifications of the computer that I use , but after I did a search on google and finally I got a solution that actually provide a solution .



I got this info from the learned stuf with title blog in the post is fixing ubuntu error : Failed to load libgl.so , that's the title of the post , and I would also like to thank you for having the blog :) .



I'm forget how to solve failed to load libgl.so on android sdk emulator in ubuntu is just to install libgl1 mesa , as shown below :

Open a terminal and run or install the following :

sudo apt-get install libgl1-mesa-dev

After i try and run the android sdk emulator in ubuntu , failed to load libgl.so hope is gone and is ready for use as well as the android sdk emulator that I use my computer at home.



Here the early solution from teh other with add the following command on terminal ubuntu than that by linking from another file like this :

ln - s / usr/lib/libGL.so.1 ~ / android-sdk-linux_x86/tools/lib/libGL.so

After I try into it in The first load load successful but after I restart the computer and then run back android sdk emulator still error message again appears failed to load libgl.so. And in the end I just give up and use with failed to load libgl.so and shared libgl.so on android emulator but seems to be a little slower and lag and I used to be uncomfortable .



Once again I said many thanks to Learned stuff for giving the best solution for me :) . Why do I talk too much because i need writing around 300 words in the word count office :) . And finally had fewer than 300 words :) . Good luck

Android x86 jelly bean 4.3 install in virtual box on windows os

For those who always want the latest update ie android x86 here the android 4.3 jellybean x86 has been released and can be used after the previous android 4.2.2 x86 jellybean have to posted a few months ago and although android 4.4 kitkat released but android x86 no news yet about it.



With ​​there are some changes that have been updated and most of this time has been updated too with the support arm translator, which means we can run almost all android apps in google play store, different with android previous ones is android x86 jellybean 4.2 that not support.



Before we try to install directly to the hard drive perhaps we could try to install android x86 in virtualbox so that we will know what the pros and cons of this android jellybean 4.3 x86. And if it is as expected and works well as the android phones are used. That way we can evaluate for themselves of the advantages and disadvantages of android x86 that we will install, because maybe there will be people who want to dual boot between android and windows that are installed together on PC/Laptop.

And here are some things that have been updated and corrected from the Android x86 source:

- Support ARM translator

- Support bluetooth

- Upgrade 3.10.2 kernel so that it becomes more driver support

- Upgrade Mesa OpenGL ES library to 9.2 devel for support amd radeon acceleration and intel chipset.

- Also Not able to suspend and resume

- No support superuser.



There are several ways to install android version of this computer or android x86 jellybean 4.3, and I give it two ways.

1. How to install x86 android 4.3 jelly bean on a PC, or laptop computer can see linked below

dual boot android and windows.

The first way above could be see on steps in the link above and the grub setting install grub2win for android-x86 you can see the method in link dual boot android and windows above and add android x86 jellybean 4.3 grub manually below:

# android #

menuentry "Android-4.3-test"{

set root='(hd0,X)'

linux /android-4.3-test/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 video=-16 SRC=/android-4.3-test

initrd /android-4.3-test/initrd.img

}

### End Android ###

note: change the red text with partition installed on android from your computer example if android on partition or drive D: then replace with (hd0,2) sometimes Drive D: = (hd0,3).

2. The second way to install android-x86 is in a virtual box

Also this steps can be use on Linux ubuntu virtualbox.

• Download virtualbox windows version if it will install a virtual box in windows here because there are several other options such as Linux and MAC OS X.


• Download jellybean X86 Android 4.3 iso android-x86-4.3-20130725.iso code@google or Android X86 .org


• After downloading the next step is to install virtual box on computer and start preparations to install android in virtual box.


• Virtualbox installation on ubuntu linux or in windows like windows xp, windows 7 and windows 8 are method.


• Open Virtual box already installed on your PC or laptop and then click the new button to create a new virtual Android x86.

This images from my second blog.

• Then a new window will be seen and click next, fill the name in accordance with your current in the box provided, switch to the Linux operating system and switch to linux 2.6 version can be seen for example in the image below and click next.

• The new window will be see to set memory capacity that will be used in a virtual box for android x86, if your computer has 1GB of RAM or memory then use the virtual box in 256mb or 512mb.

• Click next for another setting for the virtual hard disk, Create new hard disk and select the VDI and then select Fixed size and click next.

• Click next to set capacity to use, I use only 2GB.

• Click next and click create and wait until bar process is to create a virtual hard disk finish as in the example picture below.

• Next click on the settings button to the storage arrangements to enter iso file into a virtual box that you created.

Because the steps are still long and I was a bit sleepy to continue this post, more can be seen on the video below for how to install android 4.3 x86 jellybean on virtualbox.

How to install linux ubuntu 12.04 lts with the pictures

How to install ubuntu 12.04 lts precise and I think any kind of way to install ubuntu also almost the same as how to install ubuntu 8, ubuntu 9,ubuntu 10, ubuntu 11, ubuntu 13 and although there are slight differences that may be found .



Linux is a free open source software , which means it can be used and updated for free, a lot of the linux operating system that we can use like a fedora, red hat,puppy , and etc. But here I will just give you a little tutorial how to install linux ubuntu 12.04, ubuntu linux is an alternative operating system windows, because the windows are not free, for it as an alternative we can use ubuntu linux that can downloaded for free and use other software also almost free, in addition to using linux then we do not need to worry with the virus because no virus on linux, it's like ubuntu said on the official site.



How to install linux ubuntu 12.04 lts precise pangolin with images :



1. Make sure the disk partition that Ubuntu is available for approximately 6 GB for ubuntu itself is actually about 4.3 GB and for the swap partition is 1024 MB or 1GB .



2. Download ubuntu 12:04 LTS precise for free here or select the appropriate processor like intel or amd used here .



3. There are several options how to install ubuntu is as follows :

• Install using CD/DVD, backup ubuntu iso file that was downloaded with the software your choice such as nero, MagicISO etc,


• Install using a USB flash disk using Unetbootin.


• Install with no CD without flashdik just use the installer on the internal hard drive of direct ubuntu iso file, but there must be a grub boot on your booting computer.

- For windows users install grub2win first.

- Extract Grub2win in Drive C:, after grub2win extracted you will find the grub2win.exe, double click to install it and you will find grub.cfg

- Enter the following settings in grub.cfg at the bottom of the texts available in grub2 folder .







menuentry " Ubuntu 12:04 ISO " {

set isofile = " / home / / Downloads/ubuntu-12.04-desktop-i386.iso "

# Or set isofile = " / / Downloads/ubuntu-12.04-desktop-i386.iso "

# If you use a single partition for your $ HOME

loopback loop ( hd0 , 5 ) $ isofile

linux ( loop ) / casper / vmlinuz boot = casper noprompt iso-scan/filename = $ isofile noeject

initrd ( loop ) / casper / initrd.lz

}







Or could look the source in help.ubuntu.com.



4 . Once determine that we are to install ubuntu boot to ubuntu installer and follow the steps, after first boot press space on keyboard to select the language.

5. Select the "Install Ubuntu" text then select the language that will be used and wait until the loading display appears.

6. After loading passed then the next will be brought to the stage of selecting the language that will be used to install the ubuntu.

7. Click the Continue button to proceed and will be brought to the stage for the beginning of the installation is selecting application / third-party software, click Continue to proceed.

8. After further we see there are two options, namely erase the disk and something else, select "something else" choice to start setting up the hard drive manually.



9. For the hard drive is still new we can make a new partition there by clicking the "New Partition Table" and the button "Add" to start creating new partitions and hard drives with setting self-determined choice but to install ubuntu partition to be available is 4.3 GB, and format with EXT4 partition type can be seen in the image below.

10. If you've made ​​a partition for ubuntu next we create one partition for swap partitions by clicking the "Add" button, swap partition is a virtual memory to make do with the RAM and hard drive capacity used on a laptop or computer so if:

• RAM 512 MB and hard drive capacity is 30GB, then the swap partition is 512MB


• RAM 512 MB and hard drive 100GB then the swap partition is 1024MB = 1GB


• RAM 2 GB and hard drive 30GB then the swap partition is 1024MB or 1GB


• RAM 2 GB and hard drive 100GB then swap partition is 2048MB or 2GB. And can be seen the sources in help.ubuntu.com.

11. The next setting place the boot loader that will and we can set example grub2 will be installed directly on the hard disk/dev/sda or on the first partition is /dev/sda1.

12. Click the "Install Now" and wait a while till the process is completed and the next step is setting the location where we are.

13. After clicking the continue button then the next step is the selection of the type of keyboard that will be used, select a standard keyboard commonly used is the "English U.S." and click Continue.

14. And I think this is the last part of which was to determine the username and password that will be used later during the entry, and I suggest to choose automatic login.

15. After all we fill the username and password and click continue then wait for it to finish and if the installation is finished then restart button will appear and restart the computer, for using the cd/dvd after restart button wait a few minutes and click enter to open the cd/dvd rom opens by itself.

If you have questions and errors in this post please write a comment below this post.

Good luck

Install Android sdk emulator on linux ubuntu

How to install android sdk emulator on ubuntu linux as well as how to install android sdk on windows operating system , there may be a slight difference, both android sdk in ubuntu linux as well as windows.



Android SDK emulator as an alternate, the other is to install BlueStacks Android emulator than if if it turns out the specifications we have a computer or laptop vga less than 512 HD or not to install the BlueStacks will find some problems like error 25000 which means that the driver vga or vga / graphic should be updated to the latest version .



I think this emulator using android sdk android emulator better than others because every time I install the application then the application can run properly. But while the other is virtually impossible according to different opinions depending on what they see and used.



Android sdk is android that can be used on a PC or laptop and it is an interesting thing, so we do not need to buy Android phone if we already have another phone but as long as we have a laptop or PC then it can be done on a PC / laptop and it is an excess of PC / laptop, which almost could install all kinds of operating systems.



In addition we can use android on ubuntu together we can also install applications such as WeChat , whatsapp and computer line so we can run android applications .

How to install android SDK emulator on ubuntu :

1. Download and install opn jdk di ubuntu dengan cara.



Her way is to install open jdk available in ubuntu software center or synaptic package manager. open ubuntu software center and then on the right there is a small box and write open JDK, and you will see open jdk 7 and open jdk 6 or you can see here OpnJDK 7

In the terminal :

sudo apt-get install openjdk-6-jre

2. Download android sdk for linux here.

3. After downloaded extract on everywhere you like for example on Documents folder

4. Open terminal on ubuntu CTRL + Alt + T and type command :

• 
  sudo gedit ~ /. Bashrc

  
  

copy and paste this text at the very top


#AndroidDev PATH export PATH=${PATH}:/home/???/Documents/android-sdk-linux/tools export PATH=${PATH}:/home/???/Documents/android-sdk-linux/platform-tools


save and close note :the red texts is the name android sdk folder that i store on my ubuntu, adjust to your android sdk folder that you store and saved.

• And type command text below :




sudo gedit /etc/udev/rules.d/51-android.rules

copy and paste this text :

SUBSYSTEM=="usb", ATTRS{idVendor}=="0bb4", MODE="0666"

SUBSYSTEM=="usb", ATTRS{idVendor}=="0502", MODE="0666"

SUBSYSTEM=="usb", ATTRS{idVendor}=="12d1", MODE="0666"

SUBSYSTEM=="usb", ATTRS{idVendor}=="1004", MODE="0666"

SUBSYSTEM=="usb", ATTRS{idVendor}=="22b8", MODE="0666"

SUBSYSTEM=="usb", ATTRS{idVendor}=="04e8", MODE="0666"

SUBSYSTEM=="usb", ATTRS{idVendor}=="0fce", MODE="0666"

SUBSYSTEM=="usb", ATTRS{idVendor}=="0489", MODE="0666"

SUBSYSTEM=="usb", ATTRS{idVendor}=="18d1", SYMLINK+="android_adb", MODE="0666"

SUBSYSTEM=="usb", ATTRS{idVendor}=="04e8", MODE="0666", GROUP="plugdev"

Source that text is from Ubntu community.

after the text above saved reboot or restart your laptop or computer



5. Open terminal CTRL + Alt + T and type "android" without quotes to open android sdk emulator

you can chooce android version that you will install

6. Click the install packages button on the right and accept license, wait after the downloaded done.

7. After all finish click tool tab is located at the top left.

8. A new windows will appear and click the manage avds button and click the new button to begin create android emulator on the right.

9. A new window will appear when the button is clicked and Insert your android name, select your choice according to size preference. If you want to change the size of the internal memory replace 200 to 512 and sd card to 1024 = 1GB and click OK.

10. Click start to open android will appear according to your choice.

To install Android sdk emulator on windows OS see here.

How to install bluestacks with 1gb ram and onboard vga

I did installed bluestacks on the computer but will be same if you install on a laptop. Already two posts related to how to install android on pc laptop or computer with various applications such as android sdk emulator,youwave and android x86. Among each emulator has advantages and disadvantages depending on how we rate.



For this time I give a brief tutorial on how to install android on a laptop or computer with a Windows operating system using BlueStacks. What is bluestacks? BlueStacks is Android emulator application that can be used on the windows so we could use the android on a laptop or computer along with the windows. Any version of Windows that can be installed BlueStacks? Windows that can be used BlueStacks among others, windows xp, windows 7 and windows 8.



We need net framework as an additional application before we install BlueStacks because without the net framework BlueStacks will not run. In addition, look at the specification PCs / laptops are used, BlueStacks is android application that I think a lot of the used.



Here will give you tips on how to install android emulator on Windows 8 with BlueStacks and computer specs are slightly lower its specs insufficient, because its onboard VGA and not HD and 1gb of ram, use earlier BlueStacks beta version 0.7.0721. And here my computer specifications.



Operating system: Windows 8

Processor: Pentium Dual CPU 1.80 GHz x2

Graphic / VGA: 256 MB onboard intel G33

RAM / Memory: 1024 MB or 1GB



And this before you install bluestacks your PC must have Net framework installed in your PC.

Minimal computer or laptop based on the source getsatisfaction.com | getsatisfaction.com 2 is as follows:



1. 1GB of RAM

2. Graphic or VGA 256/512MB

3. Netframewrok 2.0 sp 2 can be downloaded at http://www.microsoft.com/en-us/download/details.aspx?id=1639

4. Netframework 4.0 download in http://www.microsoft.com/en-us/download/details.aspx?id=17718

How to install BlueStacks on Windows with no update VGA driver and 1gb RAM:

1. Download BlueStacks old version for low graphic or VGA here choose BlueStacks beta version 0.7.0721 or if the computer or laptop with good specs that BlueStacks can download here, which I use is windows 8.



2. After downloaded open bluestacks to install with double click and click accept ... If there will be options for such notifications and in app purchase now that the free app would be selected or not that's okay.

3. Click the install button and wait until the process is complete.



4. This is a common problem, at the time of install BlueStacks is running an error message like "your graphics hardware or dirvers do not support apps ......" just click ok. If BlueStacks continue the installation it will install normally but if at the time of clicked ok BlueStacks does not want to run or even rolling back install the BlueStacks will not be installed. You must update your vga driver to a better version or re-download BlueStacks app with the older version.

5. If the install is complete it will automatically open BlueStacks application, just play the android apps with BlueStacks.



6. Or if BlueStacks is not running automatically so we just click it on desktop or in the program files.



7. For how to install android applications apk in PC or android app to bluestacks like whatsapp messenger or other apps can be done with BlueStacks app or download android apps apk to your computer and then double-click the apps that will be installed to bluestacks and apps will be automatically installed to direct BlueStacks, or by direct download or install on the BlueStacks apps.



In some cases that the use BlueStacks on computer 1 GB ram and onboard vga which only has a capacity of 256 MB then install some applications that require better graphics HD its will got some problem and can not be installed as WeChat, and other applications



Consider once again the PC specs that I used above so that nothing was left out of what will be done on your PC. Because so many comments it seems they do not see my computer specs are used.



With BlueStacks we can use the android emulator should like android phone, but the problems during the installation may often we found as I have mentioned above. So if it will install BlueStacks note see for Bluestacks requirement of these are compatible with PC being used, so the problem will we know when to install BlueStacks.



How to install BlueStacks with low specs computer that can be seen in the video below

How to dual boot Install android kitkat x86 and windows on pc or laptop

Been a long time I did not make a post because too lazy to make new posts, but already there are some tips or turorial is to be made.



This time is not much different from the last post, namely how to install android on a PC or laptop with android x86 kitkat.



Already three posts related to how to install android on a PC or laptop that can be installed directly to the partition or to the emulator by using virtualbox, and can be used or a dual boot with windows xp, windows 7 and windows 8 even with linux like ubuntu etc..



Android kitkat is the latest android version with some significant changes, the display is a bit similar to the jellybean but new features from this kitkat android maybe you can see and feel after you install.



This kitkat Android emulator version that can be installed directly on a PC and can dual boot and can also be installed in virtualbox, but the functions and features nothing has changed with the android version kitkat on Handheld. But the differences features are usually can be see from display a Custom ROM you used.



Are you the one that's already tried this android kitkat, if it not possible to try and follow these steps below, or you have own steps to install this android x86 kitkat on your PC/Laptop.



And if you want install android kitkat x86 in virtualbox you can see here

There are two way to install android x86 4.4 RC1 kitkat as follows:

A. Install android 4.4 x86 kitkat using grub from android itself but this is not recommended, because if something goes wrong like boot windows erased or overwritten by grub boot boot into windows will result in an error.

In this step A your MBR disk setting will be replace with grub from android so i suggest to think before use this step A, see in step B below.



1 . Create a new partition in the windows 2GB , and format it to FAT32 type partitions can be put together at the windows but it is good in separation because if there is an error then the windows will not be disturbed . For more details can be seen in the video below this post .

2 . Download android - x86 - 4.4 - RC1.iso looking at android - x86.org

3 . - Burn into the USB flashDisk with Unetbootin , but be careful when going to burn it to flashdisk the datacan be erased .

- Burn to cd use nero or other iso tools .

4 . Restart the PC and then boot to USB flashdisk or cd android 4.4 kitkat by way of plug usb stick into the PC and restart the PC and then enter to bios and change the first boot to USB or CD if that use CD or if you know can directly click the button boot like F9 , F10 , F11 or F12 in accordance with the settings of the PC bios .

5 . After entry into the x86 android 4.4 kitkat first select the third option is a Live CD - Debug Mode to find out where is the fat32 sda partition, after entering typed fdisk -l and its results will be there as shown below :

In the picture above because I made a partition on the hard drive is FAT32 only one there for android so mean here the partition for android is / dev/sda3, so later on when install android install to sda3.

6. Restart the PC and boot back into android and select the fourth ie Installation - Install Android-x86 to harddisk.

7. It's already been known that the partition is sda3 for android, so install android on sda3 and do not format, to keep from mistakes of formatted

8. In other next option do not format the partition to another type and chooce OK and enter.



9. Install grub select yes and enter.

10. Select yes to boot to windows through grub.

11. Once we enter the android will soon be installed, and then to determine the memory capacity for android, we can give a maximum of 2048.

12. After install is complete, restart the PC and unplug the flash drive or cd in cpu, and the image below is an example for a grub boot android and windows.

B. Install android 4.4 x86 kitkat grub2win using:

1. Follow the above steps of No. 1 to step no.8, then for grub option do not install just skip for grub install.

2. Then if there is an option as shown below select OK and enter.

3. Then Select Yes to save the data.img on hard drive, the maximum memory size is 2GB or 2048 MB.

4. When finished reboot or restart the computer and run into the windows.

5. Grub2 for windows download here. Extract grub2 for windows on drive C:/grub2.

6. Go to the folder and install grub2 in grub2 folder namely is grub2win.exe after installed grub.cfg will there, open grub.cfg with notepad and add the android boot menu at the bottom of the texts. below is boot android text.

###Android KitKat###



menuentry "Android KitKat" {

set root='(hd0,X)'

linux /android-4.4-RC1/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 video=-16 SRC=/android-4.4-RC1

initrd /android-4.4-RC1/initrd.img

}





menuentry "Android KitKat (Debug Mode)" {

set root='(hd0,X)'

linux /android-4.4-RC1/kernel quiet root=/dev/ram0 androidboot.hardware=android_x86 video=-16 SRC=/android-4.4-RC1 DEBUG=1

initrd /android-4.4-RC1/initrd.img

}





### End Android ###

Replace the red text with a partition installed android for example the android installed in sda3 then replace hd0,X above with hd0,3 save a notepad and restart the PC or computer and after turn on the computer there will be two options first boot windows and the second is gRUB 2 Windows option and select the grub 2 android windows to get into android.

Install android x86 Kitkat dual boot with windows 7 video.

If there is a mistake in this article or have any questions please comment in the comment box below this post.

Install android kitkat x86 in virtualbox windows or linux ubuntu

After I made a post about how to install a dual boot android kitkat x86 and windows if there is still the possibility of confusion between choosing a partition or grub settings to boot android entry or, for that I give one other alternative to install android x86 kitkat with virtualbox, I think install android PC / laptop with a virtual box more better because it's easier and does not create a new partition on the hard drive.



By install android kitkat x86 in virtualbox can be done in windows operating system like windows xp, windows 7 and windows 8 as well as linux ubuntu as long as the operating system already installed virtualbox.



The tips below I did install it on Linux ubuntu virtualbox for virtualbox in windows but also I think the same way as below.



And for those want to directly install a dual boot android x86 kitkat with windows or ubuntu can see here.



For using ubuntu after install android on it then can be added grub android setting open the terminal typing "sudo gedit /boot/grub/grub.cfg" without quotes and place it at the very bottom.



Android kitkat latest version of the android operating system with new features and we can use on virtualbox, with virtualbox the installation and use easier way, even if the internet will be directly connected to the internet if internet PC is connected, for that I suggest instead we install android on virtualbox is better than dual boot, with virtualbox android kitkat then can we enlarge the view of the virtualbox, view by clicking the tabs at the top left virtulabox and click full screen.

Here's how to install android x86 kitkat in virtualbox windows or linux ubuntu :

1. Download virtualbox here or here, after the download and install on your PC / laptop.



2. Download Android 4.4 x86 kitkat here.



3. Open virtualbox and then click the New button on the left above under the menu file. All pictures in here is from my second blog.

4. Once clicked a new window will appear and click next, then fill the name in accordance with you want of its name is Android for example see the image below

5. Then click next after a new window will come out and determine the capacity for memory or RAM on your PC or laptop if it has 1GB ram I suggest to fill it with 128/256mb and if 2gb I suggest to fill it with 256/512mb.

6. Next and new menu will appear to create a new virtual disk, select create new disk and click next.

• 
  
  
  


• Chooce VDI (Virtualbox Disk Image)
  
  
  
  
  
  
  
  


• Chooce Dynamically allocated
  
  
  
  
  
  


• Once finished creating the virtual disk and then click next and fill the hard drive capacity will be created, i suggest you to create 2GB.
  
  
  
  
  
  


• After the contents of the virtual disk fill with capacity then click the next button and then click the create button and the process bar will look like in the picture below if appear
  
  
  
  
  
  

7. See file machine android in the left as shown below.

8. To install android click settings button as shown in picture No. 7 and a new window will appear then select the storage, see the arrow and click a button to open a file choose disk where the android x86 ISO kitkat stored and select the file.

9. After the ide Controller filled with the android x86 kitkat iso file that was downloaded click the Ok button at the bottom, and click the start button.



The steps is still long so I recommend to look directly at the video below

Video above shows how to install android x86 in virtualbox kitkat so with the video would be easier we will do the installation. So every step will be obvious and may be less than the error read on :), as you may well know the use of language and grammar or spelling looks a mess.